Products Description锛?/strong> The raw material of this product is stainless steel ingots. The steel ingots are melted into molten steel at 1500-1600掳 using an electric furnace, and then on the surface of the molten steel, a high-speed rotating melting wheel is used to approach the molten steel. The melting wheel is in accordance with the required steel fiber size requirements , Carve out many slots. When the melt pumping wheel descends to the molten steel level, the molten steel is scraped out by the tank, thrown out by the centrifugal force rotating at a high speed, and cooled and formed at a very fast speed. Technical Information锛?/strong> Chemical Composition(%) TypeAISI330AISI310AISI304AISI446AISI430NAS430A C鈮?.40鈮?.40鈮?.40鈮?.40鈮?.40鈮?.40 P鈮?.04鈮?.04鈮?.04鈮?.04鈮?.03鈮?.03 Mn鈮?.00鈮?.00鈮?.00鈮?.50鈮?.00鈮?.50 Si鈮?.75鈮?.50鈮?.00鈮?.00鈮?.00鈮?.50 Cr17-2024-2618-2023-2716-1816-18 Ni33-3719-228-10 Al 2-4 SS446 Chemical Composition(%) C锛?.30Ni锛?.45 Si锛?.0Cr24-27 S锛?.03Cu锛?.25 P锛?.04B锛?.003 Mn锛?.5 Diameter(mm)D=0.4/0.5/0.7/1.0Aspect ratio rangeL/D=12--87.5 Length(mm)L=6/15/20/25/30/35Configuration&ShapeMelt-extracted Application: 鈼?Metallurgical industry 鈼?Cement industry 鈼?Petrochemical industry 鈼?Construction industryStainless Steel Fiber website:http://www.coppersteelfiber.com/stainless-steel-fiber/